UV Curing with Diamond BluWave­

Curing Methods

Many traditional curing methods use cheap low intensity, low wattage florescent bulbs that can produce weak ultraviolet light. Most of the windshield repair resin currently used require a ultraviolet light to create the cross-linking and cross-hatching that is essential for UV polymer molecules to bond to the glass as well as to each other. These cheap low intensity curing methods can adversely affect the windshield repair through a slower curing process resulting in a weaker cross linking and hatching reaction.

The complete curing process produced by the Diamond BluWave^TM system was engineered so that the technician can maintain complete physical and visual contact with the repair area. Unlike traditional low intensity traditional florescent bulb curing methods, the Diamond BluWave^TM auto glass curing system gives the technician complete control on when to cure the repair without removing the injector and exposing the repair to air that can re-enter the pit area causing air pockets. Since the B1uWave is intergraded into the injector and bridge they now require no removal during the curing process, the injector can be used during the curing process to produce pressure to hold the resin into the repair while it is being cured. The Diamond BluWave^TM has an eco-friendly design which is completely portable requiring no external power source and will cure up to 15,000 repairs before any UV light maintenance is required.

The Diamond BluWave^TM high intensity UV auto glass curing system in concert with Glass Technology's PRISM^TM dry vacuum system is another testament to advancing the quality of a windshield repair. Patent pending.