GT Tools® Premium auto glass tool kit was put together for the professional. This kit is built upon the foundation of the auto glass Basic kit, but includes some extra items that add versatility and efficiency to the auto glass specialist. The kit includes the GT.38 Special; GT Tools® newest and most advanced reciprocating auto glass cutting tool. The kit also includes a choice of (1) of two wire and cord cutting system options. GT’s FinalCut™, and Kong™ wire and cord cutting systems are perfect for removing windshields from non-molding vehicles without damaging the body.

• Shipping: All orders will be processed and shipped within 1 or 2 business days upon payment not including weekends and based on the UPS delivery service requested.
• You will receive an email confirmation with tracking information as soon as your order is processed and shipped.
• All orders placed within the United States of America will ship by UPS services allotted on gtglass.com.
• All orders shipping to international addresses will ship via UPS International Economy. All international orders outside the United States of America are subject to customs, duty taxes, and brokerage fees if applicable.
• Returns: All Sales are Final. Returns and exchanges are accepted only if: 1) The wrong product was sent. 2) Any or all of your products were damaged in transit by the shipping carrier. or 3) A warrantied item is factory defective. See Terms of Service Link below for more details.
• Warranty: Warranty is extended to hand tools and power tools. All disposable and consumable supply items are not subject to warranty coverage. Each hand and power tool is warrantied to be free of defects from workmanship and materials for the period of 1 year from the date of original purchase.

Wear Safety Gear – Use gloves and goggles to protect against glass and adhesives.

Secure Work Area – Stabilize the vehicle and clear the space.

Handle Glass Carefully – Use suction cups to prevent drops.

Use Tools Properly – Follow instructions, especially for power tools.

Beware of Sharp Edges – Handle knives and scrapers with care.

Avoid Excessive Force – Prevent damage by working steadily.

Ensure Ventilation – Avoid inhaling adhesive fumes.
Dispose Responsibly – Discard glass and blades safely.
Keep Tools Secure – Store away from children.

Follow Manufacturer Guidelines – Adhere to GT Tools® instructions for safe use

DIRECTION TO USE FINALCUT REMOVAL TOOL

Step 1: Prepare the Vehicle

1. Remove windshield wipers.
3. Remove cowling clips and inspect for additional moldings or components that need removal.
4. Ensure the pinch weld channel is clear of clips, debris, and excess urethane.
5. Pre-cut windshield corners or bottom using a reciprocating auto glass cutout tool (cut at least 2" across the dash).

Step 2: Prepare and Insert Gorilla Cord, ZipLine, Titan Cord, or your choice of synthetic auto glass removal cord.

1. Attach your cord about 6 inches from the end into the T-handle notch.
2. Insert the T-handle tool through the pre-cut bottom drivers corner of the windshield.
3. Push the cord from the inside to the outside of the vehicle, leaving 1–2 feet of slack beyond the FinalCut mounting point on the inside of the vehicle and a loop roughly 10-15 ft on the outside of the glass.
4. Ensure cord is seated below the glass around the windshield.

Step 3: Set Up the Finalcut Tool

1. Attach the Finalcut tool so pulley and nose is pointed toward the upper driver corner.
2. Attach one end of the cord into the Anchor Clamp at the drivers bottom corner dash:
3 Attach the other end of the cord into the FinalCut Rear Spool
4. Turn the winding hub 4–5 times to remove slack.
5. Attach the ratchet handle or drill to the drive shaft on the FinalCut


Step 4: Begin Cutting and Protect Interior

1. Place small protection shield between synthetic cord and vehicle interior (dash, garnish molding).
2. Begin winding the Finalcut tool to start cutting up the Driver's A-Pillar
3. Reposition protection shield as needed while cutting up the A-pillar.
4. Once you cut up the Driver's A-pillar, hold down the pawl to release tension and reposition the FinalCut to the upper passenger corner. The pulley and nose should be pointed toward the upper passenger corner with the cord running back as close to the body of the tool towards the upper drivers corner.
5. Begin winding the Finalcut tool to start cutting across the headliner. Be careful of cables, mirror, etc.
6. Use a rocking motion with the ratchet handle while depressing the pawl in high-stress areas to prevent overstressing the cord.
7. Once you cut across the headliner, hold down the pawl to release tension and reposition the FinalCut to the lower passenger corner. The pulley and nose should be pointed toward the lower passenger corner with the cord running back as close to the body of the tool towards the upper passenger corner.
8. Begin winding the Finalcut tool to start cutting down the passenger A-Pillar.
9. If you pre-cut the bottom of the glass, remove the FinalCut, Unspool and reuse cord material for the next job.
10. If you did not pre-cut the bottom of the glass, hold down the pawl to release tension and reposition the FinalCut to the lower driver corner. The pulley and nose should be pointed toward the lower driver corner with the cord running back as close to the body of the tool towards the lower passenger corner.
11. Begin winding the Finalcut tool to start cutting across the dash.
12. Remove the FinalCut, Unspool and reuse cord material for the next job.


DIRECTION TO USE KONG REMOVAL TOOL

Place the KONG™ tool at the starting point of the windshield.
Feed the Gorilla Cord™ or ZipLine™ through the urethane perimeter using the guide shields.

Attach the winding assembly and use the T-handle and ratchet to tension and cut through the urethane.

Cut across the dash and headliner in a single motion—no need to reposition.

Remove the windshield carefully once the cut is complete.
Refer to the included instruction manual or training video for detailed guidance and best practices..